Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] AXIOM 12 with AIRMAR B164
05-16-18, 09:30 AM (This post was last modified: 05-16-18 11:39 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA] AXIOM 12 with AIRMAR B164
Thank you Chuck,
I got confused because on the initial questions i asked. On number two.....

"Q2 Do I disconnect Airmar B164-20 from the sounder it is attached to and go directly to AXIOM?
A2. Negative ... see the response to Q1."

....And based on the answer, I assumed that I had to keep the transducer connected to the DSM300.

Now I understand that the cable coming from the transducer should be disconnected from the DSM300 and connected to the A80489 Adaptor Cable which in turn is connected to the Axiom's 25 pin input.

Thanks for making this clear
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: [CA] AXIOM 12 with AIRMAR B164 - rarambarri - 05-16-18 09:30 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)