Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Seatalk 1 to Existing NMEA 2000 Network
04-07-16, 07:43 AM
Post: #1
Seatalk 1 to Existing NMEA 2000 Network
I would like to interface an ST60+ Depth to an existing NMEA 2000 Network. I believe the ST1 to STNG converter should be connected as an extension of the NMEA 2000 backbone with power being supplied by the existing NMEA 2000 network. If I terminate the converter on one end and the NMEA 2000 backbone on the other end, how do I connect the converter backbone to the NMEA 2000 backbone using the blue connector on the converter? Is there a blue connector devicenet adapter cable available similar to the A06045 and A06046?

Thanks!
Find all posts by this user
Quote this message in a reply
04-07-16, 09:27 AM
Post: #2
RE: Seatalk 1 to Existing NMEA 2000 Network
Welcome to the Raymarine Forum baja [censored],

At the time of this response, Raymarine did not offer a SeaTalkng to DeviceNet Micro-C Backbone (M or F) Adapter Cable. Please click here to view a FAQ addressing this subject.
Visit this user's website Find all posts by this user
Quote this message in a reply
04-07-16, 11:22 AM
Post: #3
RE: Seatalk 1 to Existing NMEA 2000 Network
OK, got it. Thanks!
Find all posts by this user
Quote this message in a reply
04-08-16, 03:00 PM
Post: #4
RE: Seatalk 1 to Existing NMEA 2000 Network
Anytime, contact us with any future questions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)