(DG11) Intermittent depth

[Derek - Raymarine - Moderator]

Hi beneteau472

Thank you for your enquiry.

The simplest solution would be to replace the tridata with an i50 Tridata, see here this will connect direct to your existing transducers and will link in to your existing SeaTalk network.

You may have to remove some adjoining plugs and use spade connectors to rejoin the network,depending on whether you have ST50 or ST60 instruments onboard.

You would not be able to use the NMEA2000 smart depth Transducer, since this will not be able to interface directly to SeaTalk.

regards