Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] NMEA 2000 and Axiom 9
05-25-18, 08:38 AM
Post: #9
RE: [CA11] NMEA 2000 and Axiom 9
Bill,

Per my initial post, the Identify Engines feature of LightHouse 3 software is exclusively designed to be used with engine systems which have been interfaced to the marine electronics backbone using Raymarine's ECI-100 Engine Gateway. When a third party engine gateway(s) has been used, the MFD will simply function as a repeater device and will expect that the third party engine gateway(s) are transmitting engine data PGNs featuring Device Instance Number(s) which are consistent with the NMEA 2000 convention specified within the previously referenced FAQ. All that is necessary to do within the MFD's settings is to specify the number of engines which they system has and then display the Engines data panel within the Dashboard application.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] NMEA 2000 and Axiom 9 - will40 - 05-22-18, 05:04 PM
RE: [CA11] NMEA 2000 and Axiom 9 - Chuck - Raymarine - Moderator - 05-25-18 08:38 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)