Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrading from an E80 to Axiom 12
06-04-18, 03:31 PM (This post was last modified: 06-04-18 04:19 PM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] Upgrading from an E80 to Axiom 12
I am going to have two Axiom Pros, one at the binnacle and one down below plus a Quantum 2 Doppler radar. I think the Axiom Pros have two Raynet Ports. Is the Radar connected to the binnacle Axiom by a Raynet cable and then that Axiom connected to the Axiom down below by a second RayNet cable? Is the HS5 Raynet Network switch to provide me with one more connection such as for the Sirius radio?


Is it better to convert my ST 60 transducers to NMEA2000 with an ITC5 Converter or to convert the SeaTalk data to NMEA 200 by a converter?

Is there a diagram available?

Thanks again for your help. I am slowly getting there.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Upgrading from an E80 to Axiom 12 - carlmk - 06-04-18 03:31 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)