Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] A78 mfd screen is not working
06-03-18, 02:42 PM (This post was last modified: 06-04-18 11:05 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] A78 mfd screen is not working
This is the second year of this display, and when i turned it on for the first time, it has hundreds of vertical lines. It still works to send information to my other display. So i am able to wiev the transducer info, and the maps. I am able to power off, but can’t read what i am doing. I just know it is the same as the other. Is this something that can be repaired? How do i go about it?
Find all posts by this user
Quote this message in a reply
06-04-18, 11:04 AM (This post was last modified: 06-04-18 11:05 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] A78 mfd screen is not working
Welcome to the Raymarine Forum Kevin,

I'm sorry to learn of the problem reported with your a78 MFD's screen. I have had three a-Series MFDs, including an a78 MFD, onboard my boat for the last four years ... love them. The symptoms provide appear to be associated with a failure within the MFD's circuitry. These MFDs may indeed be repaired and it would be recommended that the MFD be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)