The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Raypilot 650 Losing Heading

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Raypilot 650 Losing Heading
06-04-18, 02:18 PM (This post was last modified: 06-05-18 04:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
jsak001 Offline
Junior Member
**
 		Posts: 3
Joined: May 2017
Reputation: 0
[CA11] Raypilot 650 Losing Heading
I realize the Raypilot 650 is no longer supported but was wondering if you could offer some feedback on a heading issue I'm having. Ever since the end of last season, the unit will not keep an accurate heading. I have followed the re-calibration procedure by entering calibration mode and driving slowly in circles for 3 minutes and I've also done the manual adjustment several times. It will stay accurate for about 20 minutes then show an inaccurate heading again. Is there anything that could be causing this or is the unit just old and needs to be replaced? It interfaces just fine with my Raymarine e97, so I don't want to replace it if it's not necessary.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Raypilot 650 Losing Heading - jsak001 - 06-04-18 02:18 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication