CP100 No Network Error

[Chuck - Raymarine - Moderator]

dsteiger,

It is recommended that you check the MFD's diagnostic Select
Device List (HOME->SET-UP->MAINTENANCE->DIAGNOSTICS->SELECT DEVICE) to verify that the CP100 has been updated with v10.06 software. If not, then the CP100's software should be updated accordingly. If so, then please note that no CP100 tab within the Fishfinder application's Channel dialog when the system features a single fishinding produced. Instead, the Channel dialog will simply have options for "Ping Enable", "Sonar", or "DownVision". Selecting the "Sonar" or "DownVision" option will then cause the Fishfinder application page/pane to be populated with the selected sonar imagery.