[TG11] Trip distance settings

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] Trip distance settings

07-17-18, 01:41 PM (This post was last modified: 07-17-18 02:33 PM by Chuck - Raymarine - Moderator.)

Post: #5

rltrbill Offline

Member

Posts: 75
Joined: Feb 2016
Reputation: 0

RE: [TG11] Trip distance settings

The first pic I shared was while running (boat in motion) showing ground trip but not Trip. I went into "select speed source" and it is blank (see pic2). When I went into tdcr settings, it is set on P58/P65/P66 (see attached). When I changed the F finder source to "internal sounder" and then went to TDCR setup, it just had options for "depth offset" and "temp offset" (see attached 3) and nothing else.

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] Trip distance settings - rltrbill - 07-13-18, 08:44 AM

RE: [TG11] Trip distance settings - Tom - Raymarine - Moderator - 07-16-18, 03:09 AM

RE: [TG11] Trip distance settings - rltrbill - 07-16-18, 03:49 PM

RE: [TG11] Trip distance settings - Tom - Raymarine - Moderator - 07-16-18, 08:46 PM

RE: [TG11] Trip distance settings - rltrbill - 07-17-18 01:41 PM

RE: [TG11] Trip distance settings - Tom - Raymarine - Moderator - 07-17-18, 08:44 PM

RE: [TG11] Trip distance settings - rltrbill - 07-18-18, 10:44 AM

RE: [TG11] Trip distance settings - Tom - Raymarine - Moderator - 07-19-18, 01:52 AM

RE: [TG11] Trip distance settings - rltrbill - 07-19-18, 09:25 AM

RE: [TG11] Trip distance settings - Tom - Raymarine - Moderator - 07-19-18, 06:26 PM

User(s) browsing this thread: 1 Guest(s)