Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] JL Audio MM100S to Axiom

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] JL Audio MM100S to Axiom
02-19-19, 02:55 PM (This post was last modified: 02-19-19 02:56 PM by Chuck - Raymarine - Moderator.)
Post: #7
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] JL Audio MM100S to Axiom
kaptkaos,

In order to support integration with JL Audio products, the MFD must be updated with LightHouse 3 v3.8.97 or later software. The supported JL Audio entertainment systems feature a NMEA 2000 dongle which is terminated with a DeviceNet Micro-C (M) plug. This plug will be adapted to be interfaced to a spur socket within the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone. Details of how to use the MFD's Audio App may be found within Chapter 15: Audio app of the LightHouse 3.8 Advanced Operation Instructions. These instructions also list all JL Audio products which have been tested with LightHouse 3.8 software.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] JL Audio MM100S to Axiom - Chuck - Raymarine - Moderator - 02-19-19 02:55 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication