Raymarine forum / Raymarine Forums / Radar v / [CA] [CA11] Radar displays and Seatalk ng

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Radar displays and Seatalk ng
07-25-18, 10:29 AM (This post was last modified: 07-27-18 01:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
oricohen Offline
Junior Member
**
 		Posts: 12
Joined: Jun 2017
Reputation: 0
[CA11] Radar displays and Seatalk ng
I have an E120 MFD, and an older non digital radar, including ST60 speed depth and multi data display. I upgraded the network to seatalk ng with two i70 displays and ITC 5 convertor. including a new wind transduce that came with the ITC5 package. My radar continually giving a message " No data Source" I don't know how to change it or to turn the unit on so the radar will function reset itself.

Thank you
Find all posts by this user
Quote this message in a reply
07-27-18, 11:59 AM (This post was last modified: 07-27-18 01:22 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Radar displays and Seatalk ng
Welcome to the Raymarine Forum oricohen,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication