ES127 + Lighthouse v16.47 + ICOM 506 Radio v1.02

[mmichael]

Hello,

I have a Raymarine ES127 and ICOM 506 Radio connected via NMEA 2000 with DSC Messages enabled in Lighthouse software.

I did a DSC position request to another vessel (nicknamed: ISOS / MMSI# 338159709) and once the VHF received the response it popped up on the ICOM 506 as well as the Raymarine MFD. The VHF displayed coordinates are the correct coordinates.

The only problem is the Raymarine showed coordinates that were slightly off. Here is a picture of each taken from the same position request.

Does anybody have a solution to the communication issue on the coordinate sentences between the ICOM and Raymarine MFD? It renders the ability to plot a vessels position on the MFD useless.

Thanks in advance!

Michael