[CA11] Weighing Options - Autopilot for a 185 Runabout

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Weighing Options - Autopilot for a 185 Runabout

07-27-18, 03:16 PM

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Weighing Options - Autopilot for a 185 Runabout

Welcome to the Raymarine Forum rengnath,

I'm using your option 1 on my '01 22' Stingray 220DS w/cable steering and Mercruiser Alpha 1 Gen II outdrive. The combination of components have proven outstanding. I have had the Octopus Remote Sterndrive onboard my boat for than ten years and it has proven extremely reliable. As you have suggested, it both easier to install and may easily be removed for use with another boat ... not quite so for the hydraulic option. Given that the cost difference is only about $100, you will make that back many times over in reduced installation time.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Weighing Options - Autopilot for a 185 Runabout - rengnath - 07-26-18, 03:00 PM

RE: [CA11] Weighing Options - Autopilot for a 185 Runabout - Chuck - Raymarine - Moderator - 07-27-18 03:16 PM

RE: [CA11] Weighing Options - Autopilot for a 185 Runabout - rengnath - 07-30-18, 02:47 PM

RE: [CA11] Weighing Options - Autopilot for a 185 Runabout - Chuck - Raymarine - Moderator - 07-30-18, 03:45 PM

RE: [CA11] Weighing Options - Autopilot for a 185 Runabout - rengnath - 10-02-18, 02:30 PM

RE: [CA11] Weighing Options - Autopilot for a 185 Runabout - Chuck - Raymarine - Moderator - 10-02-18, 02:49 PM

RE: [CA11] Weighing Options - Autopilot for a 185 Runabout - rengnath - 10-02-18, 03:13 PM

RE: [CA11] Weighing Options - Autopilot for a 185 Runabout - Chuck - Raymarine - Moderator - 10-02-18, 03:41 PM

RE: [CA11] Weighing Options - Autopilot for a 185 Runabout - rengnath - 10-03-18, 11:20 AM

RE: [CA11] Weighing Options - Autopilot for a 185 Runabout - Chuck - Raymarine - Moderator - 10-03-18, 11:23 AM

User(s) browsing this thread: 3 Guest(s)