European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
Sending routes to C80
|
|
04-20-16, 09:50 AM
(This post was last modified: 05-02-16 10:06 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
|
RE: Sending routes to C80
Welcome to the Raymarine Forum weisbergj,
It is recommended that you verify that the NMEA 0183 input leads (white and green) of the MFD's NMEA 0183 Cable have been interfaced correctly your multiplexer and that the multplexer's NMEA 0183 output port and MFD's NMEA 0183 port have both been configured for 4800 BAUD NMEA 0183 communications. If so, then the MFD's NMEA 0183 IN (Rx) port should be monitored to verify whether data is flowing into its NMEA 0183 buffer as follows: - MENU->SYSTEM DIAGNOSTICS->EXTERNAL INTERFACES->NMEA0183 - Press the BUFFER function key - Configure the DIRECTION function key to Rx - Command the PC planning application to transmit its waypoints - Examine the MFD's IN buffer for received and properly formatted NMEA 0183 v3.01 sentences. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Sending routes to C80 - weisbergj - 04-19-16, 06:30 PM
RE: Sending routes to C80 - Chuck - Raymarine - Moderator - 04-20-16 09:50 AM
RE: Sending routes to C80 - weisbergj - 04-24-16, 02:33 PM
RE: Sending routes to C80 - Chuck - Raymarine - Moderator - 04-26-16, 10:22 AM
RE: Sending routes to C80 - weisbergj - 05-01-16, 06:05 PM
RE: Sending routes to C80 - Chuck - Raymarine - Moderator - 05-02-16, 10:15 AM
|
User(s) browsing this thread: 1 Guest(s)