Sending routes to C80

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Sending routes to C80

04-24-16, 02:33 PM (This post was last modified: 04-25-16 01:50 PM by Chuck - Raymarine - Moderator.)

Post: #3

weisbergj Offline

Junior Member

Posts: 23
Joined: Feb 2016
Reputation: 0

RE: Sending routes to C80

Thanks Chuck. I believe the wiring is correct, as the C80 is receiving AIS data over the same NMEA input leads.

I have the C80 port set to 38400 baud, as required for AIS. However, I did try slowing it down to 4800 with no results.

I will try your suggestions below when I'm next on the boat.

« Next Oldest | Next Newest »

Messages In This Thread

Sending routes to C80 - weisbergj - 04-19-16, 06:30 PM

RE: Sending routes to C80 - Chuck - Raymarine - Moderator - 04-20-16, 09:50 AM

RE: Sending routes to C80 - weisbergj - 04-24-16 02:33 PM

RE: Sending routes to C80 - Chuck - Raymarine - Moderator - 04-26-16, 10:22 AM

RE: Sending routes to C80 - weisbergj - 05-01-16, 06:05 PM

RE: Sending routes to C80 - Chuck - Raymarine - Moderator - 05-02-16, 10:15 AM

User(s) browsing this thread: 1 Guest(s)