Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] Sonar detail lost when tapping screen

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Sonar detail lost when tapping screen
08-14-18, 12:38 AM (This post was last modified: 08-20-18 10:22 AM by Chuck - Raymarine - Moderator.)
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] Sonar detail lost when tapping screen
Hello Gamecock00,

That's a new one to me. Can you tell me what version of software you're running on the Axiom (Home > Settings), and whether the same thing happens on the DownVision display?
Can you also tell me what your Sensitivity Settings levels are set to? That looks like quite a high gain or contrast level.
Finally: the very cluttered-looking view on the Sonar channel is in part due to the choice of Classic White colour palette. I generally recommend the Sunburst palette, because it's a clear in sunlight as Classic White with strong marks still in dark red, but the clutter is in pale yellow and inobtrusive against the white background, it doesn't detract from the image.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Sonar detail lost when tapping screen - Tom - Raymarine - Moderator - 08-14-18 12:38 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication