Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Hydraulic drive compatibility
08-08-18, 03:33 AM (This post was last modified: 08-14-18 03:14 PM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] Hydraulic drive compatibility
What autopilot system do you recommend for a 14 ton sailboat with an Accu Steer LA 17-12 hydraulic drive unit. My current autopilot is the 300 12v Course Computer with the ST 6000+ control head. I believe the course computer is u/s as I cannot calibrate the system and I have a deviation of 46 degrees! Thanks.
Find all posts by this user
Quote this message in a reply
08-20-18, 05:18 AM
Post: #2
RE: [DG11] Hydraulic drive compatibility
HI Santosha Too

I am not familiar with the Accu Steer unit, however, if the T300 system steered the boat OK, then the hydraulic pump you used with that system is likely a T2? is that correct?

If you had a T2 pump fitted, then an EV1, with ACU400 and p70s control head will be required.

thanks

Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)