Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] New ES128 using DSM 300 seatalk cable? Importing waypoints from classic?

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] New ES128 using DSM 300 seatalk cable? Importing waypoints from classic?
08-17-18, 08:35 AM (This post was last modified: 08-17-18 08:36 AM by Chuck - Raymarine - Moderator.)
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] New ES128 using DSM 300 seatalk cable? Importing waypoints from classic?
Mike,

When a Fishfinder application page/pane is opened, the application's menu will provide and option to select the fishfinder Channel to be viewed. Should the 200kHz or 50kHz channel of the DSM300 tab be selected, then the Fishfinder application's menu will include a Set-up option which in turn supports transducer set-up. Transducer selection need only occur within one of the Fishfinder application pages / panes which has been configured to use the 200kHz or 50kHz channel of the DSM300. Accordingly, the model of transducer which has been interfaced to the DSM300 will need to be specified.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] New ES128 using DSM 300 seatalk cable? Importing waypoints from classic? - Chuck - Raymarine - Moderator - 08-17-18 08:35 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication