Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Losing the GPS Signal and "Go To" Function

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Losing the GPS Signal and "Go To" Function
08-15-18, 07:46 PM (This post was last modified: 08-16-18 08:03 AM by Chuck - Raymarine - Moderator.)
Post: #3
carlmk Offline
Junior Member
**
 		Posts: 42
Joined: Oct 2017
Reputation: 0
RE: [CA11] Losing the GPS Signal and "Go To" Function
Since I originally wrote, I carefully observed that the gps signal is lost only for a fraction of a second. In this fraction the “go to” function is disabled. If there was a few second delay before the “go to” function was disabled then the gps signal faltering would have no affect.

I have a second gps in my Standard Horizon VHF buried down below in my nav station. I have never seen it lose the signal once squired. It is not connected to my Axiom.

I even removed my Bimini so my Axiom at the helm has a direct sky view. Same problem. Why would an external antenna solve this problem? I hesitate to go to the expense and trouble of installing an antenna with out certainty of outcome.

BTW the signal is lost for such a short time my wireless remote a/p controller does not react.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Losing the GPS Signal and "Go To" Function - carlmk - 08-15-18 07:46 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication