Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Losing the GPS Signal and "Go To" Function

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Losing the GPS Signal and "Go To" Function
07-18-19, 09:51 AM (This post was last modified: 07-18-19 10:54 AM by Chuck - Raymarine - Moderator.)
Post: #10
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Losing the GPS Signal and "Go To" Function
Welcome to the Raymarine Forum RGG,

Please refer to my initial response to Carl on this subject and respond to regard to each of the items listed. Additionally, the internal GPS receivers within products are not all equivalent in their reception capability. You mentioned a spray hood. What is this spray hood constructed from? What version of LightHouse 3 software is presently installed within the MFD's memory? What other electronic devices capable of emitting RF energy have been installed within 3' of the MFD? Please additionally attach a photo of the area where the MFD is installed and a photo which shows any overhead structures.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Losing the GPS Signal and "Go To" Function - Chuck - Raymarine - Moderator - 07-18-19 09:51 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication