Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Losing the GPS Signal and "Go To" Function

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Losing the GPS Signal and "Go To" Function
07-23-19, 05:04 AM (This post was last modified: 07-23-19 08:24 AM by Chuck - Raymarine - Moderator.)
Post: #14
carlmk Offline
Junior Member
**
 		Posts: 42
Joined: Oct 2017
Reputation: 0
RE: [CA11] Losing the GPS Signal and "Go To" Function
Virtually all of the losses of the “go to” issues described would go away if there was a delay of a few seconds after the GPS signal was lost before disconnecting the “follow” function. The Axiom is reacting too fast!

I measured the GPS loss(before adding an external antenna). They were always under 3 seconds. No external antenna would have been needed in n my case if there had been a delay.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Losing the GPS Signal and "Go To" Function - carlmk - 07-23-19 05:04 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication