[CA] [CA11] Screen covered with solid objects
|
08-10-18, 08:09 AM
(This post was last modified: 08-16-18 10:14 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Screen covered with solid objects
I have two E80 classics, DSM300, SR100, and RD424 Radome, all software is up to date, this problem just started as follows; when the range of 3 miles or less is selected the screen and targets appear to be operating properly but when I change the range to any distance from 6 miles or greater the complete screen becomes solid yellow except a very small radius at the ships position. I am not sure but it appears the scanner may also be rotating a little faster than normal. All the settings are in default and "Auto". I can clear the screen by manually adjusting the gain but by doing this I am unsure of its reliability to detect targets.
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Screen covered with solid objects - fwvesper - 08-10-18 08:09 AM
RE: [CA11] Screen covered with solid objects - Chuck - Raymarine - Moderator - 08-16-18, 10:01 AM
|
User(s) browsing this thread: 1 Guest(s)