Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Extension Cable for Axiom Pro S
08-12-18, 11:20 PM (This post was last modified: 08-16-18 03:55 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Extension Cable for Axiom Pro S
I have just installed an Axiom 9 Pro - S (E70481-00-NAG) in my 41' Beneteau. I have also installed the CPT-S Through Hull High Chirp Transducer (E70339) and have the Transducer Adapter Cable (A80490) to connect the transducer cable to the Axiom 9 Pro. Unfortunately, the CPT-S cable is approximately 3 meters too short.

Is there a Raymarine extension cable that I can add between the Transducer cable end (E70339) and the Transducer Cable Adapter (A80490)?

Thanks in advance.
Find all posts by this user
Quote this message in a reply
08-16-18, 04:00 PM
Post: #2
RE: [CA11] Extension Cable for Axiom Pro S
Welcome to the Raymarine Forum firestorm411,

Raymarine offers the A80273 4m Transducer extension cable to extend the E70339 CPT-S Through Hull High Chirp Transducer's cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)