The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] E7D stopped receiving data through my ECI-100

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E7D stopped receiving data through my ECI-100
08-28-18, 08:23 AM (This post was last modified: 08-29-18 01:03 PM by Chuck - Raymarine - Moderator.)
Post: #1
tmoney316 Offline
Junior Member
**
 		Posts: 23
Joined: Feb 2016
Reputation: 0
[CA11] E7D stopped receiving data through my ECI-100
Hello,
Recently I stopped receiving engine data to my E7D a few weeks ago? The ECI-100 SeaTalk LED light blinks green every 15 seconds and the Engine CAN bus LED light blinks red 7 times and then stops for a couple seconds and does it again. All it says in the installation manual for those error lights is "Network connected but no traffic (no message received in more than 5 seconds." It doesn't give a "User Action" to try, so just wondering if someone has an idea of what to try?
My E7D's firmware is 19.03
ECI-100 is 1.20
CP370 is 13.34
Thanks for any help you can give me.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] E7D stopped receiving data through my ECI-100 - tmoney316 - 08-28-18 08:23 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication