[DG] [DG] Evolution wheel pilot clutch releasing

[Derek - Raymarine - Moderator]

Hi daknecht

I suspect this is related to your other post, if the rollers that are activated by the belt tension eccentric and the clutch lever are seized, or stiff, then they will drag on the belt and as the wheel rotates in one direction the clutch roller will not turn and so the eccentric will not 'roll' off and release the belt tension - as if the clutch were disengaged.

Dismantle the drive and remove and clean the two rollers, lightly grease and ensure they are free to turn.
Reassemble the drive and check the drive turns smoothly and the clutch engages and disengages smoothly.

Regards
Derek