[CA11] Integrating GPS sensor to E80 with NMEA

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DM] [CA11] Integrating GPS sensor to E80 with NMEA

09-06-18, 07:40 AM (This post was last modified: 09-18-18 08:11 AM by Chuck - Raymarine - Moderator.)

Post: #2

Dave - Raymarine - Moderator Offline

Administrator

Posts: 97
Joined: Mar 2017
Reputation: 0

[DM11] Integrating GPS sensor to E80 with NMEA

Hi Robr,

Unfortunately, I cannot definitively answer which network your RS125 may be using. The reason is because the RS125 can communicate both SeaTalk 1 and NMEA 0183. Either way, both connections(SeaTalk 1 and NMEA 0183) are available on the back of your E80 MFD. So, you will need to first identify how the antenna is connected, and if you have anything else connected NMEA 0183 to the MFD first.

Also, intermittent fix could be from a bad connection, cabling, or antenna.

- Dave

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Integrating GPS sensor to E80 with NMEA - robr - 09-05-18, 09:34 AM

[DM11] Integrating GPS sensor to E80 with NMEA - Dave - Raymarine - Moderator - 09-06-18 07:40 AM

RE: [CA11] Integrating GPS sensor to E80 with NMEA - robr - 09-17-18, 04:42 PM

RE: [CA11] Integrating GPS sensor to E80 with NMEA - Chuck - Raymarine - Moderator - 09-18-18, 08:17 AM

User(s) browsing this thread: 1 Guest(s)