The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Navionics auto routing

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Navionics auto routing
09-11-18, 06:25 PM (This post was last modified: 09-12-18 01:23 PM by Chuck - Raymarine - Moderator.)
Post: #1
Frenchy Offline
Junior Member
**
 		Posts: 4
Joined: Feb 2018
Reputation: 0
[CA11] Navionics auto routing
I have a new Axium 12" and love it. Still learning and have a couple questions I hope you can help with.
1) Navionics auto routing calculates a route and ( on tablet ) provides the distance and time to go) this info is based on plot and boat speed data already entered. On the Axium it will plot the route but will not provide distance and time to go. The only thing I have been able to figure out is time to next waypoint. This is something that might be benificial but not what I'm looking for.
Any ideas?
2) secondly upon following a route every time I reach a new waypoint an alarm goes of. Very annoying considering auto routing uses a lot of waypoints. Any suggestions to stop the alarming and just go to next waypoint?

Tks in advance
Jeff French
Yachts of Fun
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Navionics auto routing - Frenchy - 09-11-18 06:25 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication