Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 Pro manually entering GPS coordinates
09-13-18, 07:20 AM (This post was last modified: 09-13-18 08:45 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom 9 Pro manually entering GPS coordinates
Hello,
I have looked in the manual for the Axiom 9 pro but cannot seem to find any information on this.
Is there a way to manually enter GPS coordinates ( lat and long) on this unit?
Would be nice to do if possible when trying to see where someone that need assistance is to your position.

Thank you,
Lance.
Find all posts by this user
Quote this message in a reply
09-13-18, 08:50 AM
Post: #2
RE: [CA11] Axiom 9 Pro manually entering GPS coordinates
Welcome to the Raymarine Forum Lance,

This subject is addressed in detail within Chapter 7.1: Waypoints of the LightHouse 3.6 Advanced Operation Instructions. In short the command sequence Menu->New->New waypoint at lat/long is used to create a waypoint at the coordinates entered by the user.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)