Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] EV 150
09-24-18, 08:06 PM (This post was last modified: 09-25-18 04:39 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG] EV 150
Just purchased a 150 to be used as a stand alone unit.Not interfaced with other electronics. Do I need a rudder reference sensor for it to operate correctly. (. Do not need a visual display to see where my rudders are for my intended use. I do have a EV 200 on other boat so I am aware of the benefits of a visual display. )
Find all posts by this user
Quote this message in a reply
09-25-18, 04:45 AM (This post was last modified: 09-25-18 04:45 AM by Derek - Raymarine - Moderator.)
Post: #2
RE: [DG] EV 150
HI mr 88
Welcome to the forum,

As long as you are using hydraulic steering, there is no need for a rudder reference unit, although we always suggest it will improve performance.

Please refer to this FAQ for further information

thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)