Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] A65 Compatability
01-27-19, 06:25 AM
Post: #22
RE: [CA11] A65 Compatability
Hi Derek... I've started to fit my new (old stock) A50 plotter.... However Im having issues getting it to connect to my seatalk1 network...
I checked my system before starting the install and everything was working as expected... i.e comms etc etc..
As per your earlier posts. I bought a seatalk to ng (seatalk1 to yellow seatalk ng cable).. (seatalk ng to seatalk ng cable white)
I was lucky enough to be given a E221581103655 seatalk to seatalk converter..

I connected the seatalk 1 yellow to the spare seatalk on the back of my wind instrument and powered up the A 50 for the first time... following your instructions i disabled the internal gps.. However... Ive got no communication between the plotter and the seatalk1 network... so no gps etc etc... the converter appears to be powering up, as I get a green flashing light... Am I missing something?? Do I need the blanking plugs for the seatalk converter???

Regards Tim
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] A65 Compatability - morepower - 09-29-18, 02:06 AM
RE: [CA11] A65 Compatability - morepower - 01-27-19 06:25 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)