Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] EV100 Seatalk Cable Length
10-27-18, 04:16 PM (This post was last modified: 10-29-18 09:30 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG] EV100 Seatalk Cable Length
Can you advise the length of the Seatalk cables included with the autopilot? I’m not sure the length is sufficient for my application. Additionally, what cable would be required by part number to increase the length of the Seatalk connection if required by the installation? I would need a cable length between the p70R and the EV1 sensor of about 12 to 14 feet. Thank you.
Find all posts by this user
Quote this message in a reply
10-29-18, 09:36 AM
Post: #2
RE: [DG] EV100 Seatalk Cable Length
HI bwconquest21

Thankyou for your enquiry,

The EV100 kit is supplied with a cable kit which contains a 5m backbone cable, plus a 1m spur cable, 2 STng T pieces and 1 5 way connection block. There will also be a 1m spur cable with the EV1 and a 1 m spur for the ACU.

If you refer to the Installation manuals found here or here , this will give you more guidance on the configuration of the STng network.

regards
Derek
Find all posts by this user
Quote this message in a reply
10-29-18, 06:14 PM (This post was last modified: 10-30-18 08:18 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [DG] EV100 Seatalk Cable Length
Thank you.
Find all posts by this user
Quote this message in a reply
10-30-18, 11:02 AM
Post: #4
RE: [DG] EV100 Seatalk Cable Length
Hi bwconquest21,

You're welcome!

Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)