Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] 2kw scanner issue
10-29-18, 06:19 PM (This post was last modified: 10-30-18 10:05 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] 2kw scanner issue
had a sl72 that worked fine with 2kw radome, replaced it with a C120 and now the c120 says SCN Incompatible and under that Scanner Sw Version and Scanner HW. looks like scanner Sw is 3.0. Can I upgrade the scanner Sw or does it need to be replaced
Find all posts by this user
Quote this message in a reply
10-30-18, 10:43 AM
Post: #2
RE: [CA11] 2kw scanner issue
Welcome to the Raymarine Forum snoble90,

While all 2D radomes were compatible with hsb/hsb2/SL Pathfinder Series Radar Displays, the same was not so for C/E-Series Classic MFDs. Please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, only late production 2D radomes (product ID ending in "S") were compatible with the C/E-Series Classic MFDs. Please note that compatible radomes for C-Series Classic MFDs were discontinued over ten years ago. Accordingly, those seeking a compatible radome would be recommended to seek a compatible second hand radome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)