The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [TG] [TG11] p70s & i70s - wind

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] p70s & i70s - wind
11-12-18, 02:24 AM (This post was last modified: 11-15-18 10:24 PM by Tom - Raymarine - Moderator.)
Post: #1
watsala Offline
Junior Member
**
 		Posts: 37
Joined: Nov 2017
Reputation: 0
Information [TG11] p70s & i70s - wind
Hello,

I have a issue where the wind on the i70s and the p70s is shown as coming from different directions.

System hardware:
EV400 + p70s
Sail Pack + DST800 + iTC5 + i70s + wind vane/anemometer
There is also a Axiom Pro running the latest version of LH3

Tried so far:
Set both to display apparent wind.

Observations:
The "dumb" wind vane at the top of the mast that is not connected to anything appears to align with the i70s, its the p70s that is considerably different.

I calibrated the EV400 when installed, it was several months later that the Sail Pack was installed, and the sail pack was then calibrated (speed, wind, temperature were all calibrated).

Q: Beyond how to fix this, I would like to know where the wind calibration data is stored? I assume on the iTC5.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] p70s & i70s - wind - watsala - 11-12-18 02:24 AM
RE: [TG11] p70s & i70s - wind - watsala - 11-18-18, 12:48 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication