[CA] [CA11] Ais connection via raymarine autohelm st 7000
|
12-18-18, 06:48 AM
(This post was last modified: 12-18-18 09:06 AM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: [CA11] Ais connection via raymarine autohelm st 7000
Thank you Chuck,
You right, I lost one 0, the autohelm is a st 7000 not st 700 :-) as I wrote in the title.. So my friend and I have to check for an autopilot course computer if I have good understand.. He bought his boat used, so he dont’know exactly what he have on board ( Perry 47 feets sailboat, from 1980 year) the autohelm st 7000 has some inputs like nmea but they are labeled different: Aux 3 and aux 4 and bus 1 and bus 2 Nothing to do with this inputs? I have attached the autopilot controller, it is this what you mean ? Thanks again Antonio |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Ais connection via raymarine autohelm st 7000 - toniocask - 12-15-18, 05:25 AM
RE: [CA11] Ais connection via raymarine autohelm st 7000 - Chuck - Raymarine - Moderator - 12-17-18, 04:33 PM
RE: [CA11] Ais connection via raymarine autohelm st 7000 - toniocask - 12-18-18 06:48 AM
RE: [CA11] Ais connection via raymarine autohelm st 7000 - Chuck - Raymarine - Moderator - 12-18-18, 09:13 AM
RE: [CA11] Ais connection via raymarine autohelm st 7000 - toniocask - 12-19-18, 04:31 AM
RE: [CA11] Ais connection via raymarine autohelm st 7000 - Chuck - Raymarine - Moderator - 12-19-18, 09:04 AM
|
User(s) browsing this thread: 1 Guest(s)