Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] CP 370 to a B264N

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] CP 370 to a B264N
01-07-19, 09:00 AM (This post was last modified: 01-07-19 01:35 PM by Chuck - Raymarine - Moderator.)
Post: #1
Daybreaker Offline
Mike Deto
**
 		Posts: 14
Joined: Mar 2016
Reputation: 0
[CA11] CP 370 to a B264N
Can you use a B264N..narrow with a CP370? Thanks, Mike
Visit this user's website Find all posts by this user
Quote this message in a reply
01-08-19, 01:08 PM (This post was last modified: 02-05-20 01:28 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] CP 370 to a B264N
Welcome to the Raymarine Forum DayBreaker,

It is recommended that the CP370 (as well as the legacy CP300, DSM300, DSM30, and hsb/hsb2/SL Pathfinder Series Fishfinder Displays) be used with the Raymarine transducers listed here. Should one be considering use of other Airmar branded 50kHz/200kHz fishfinder transducers with a CP370 (or the other fishfinder products listed above), then it would be recommended that Gemeco, Inc. (Airmar’s US distributor (803 693 0777)) be contacted to address compatibility concerns. Should Gemeco indicate compatibility, then it would be recommended a similar transducer from the Fishfinder application's transducer list (ex. B260) be selected from the Fishinder application's transducer selection list.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication