Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Network with E7, Axiom and HS5

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Network with E7, Axiom and HS5
01-08-19, 12:21 PM
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Network with E7, Axiom and HS5
Peter,

Q1. Will I be able to see the radar screen on the E7 if the Axiom MFD is running?
A1. Negative. Radar spoke communications is not supported via a SeaTalkng / NMEA 2000 network. The latter would require either Wi-Fi or wired Ethernet communications between the e-Series MFD and the radome.

Q2. Please see attached diagram, I have now changed position of S1G and ST6002, is this installation correct?
A2. The diagram should be annotated at the autopilot course computer to note that the red lead of the SeaTalk Cable connecting the autopilot course computer's SeaTalk port to the ST-STng Converter's SeaTalk socket should not be connected to the red SeaTalk terminal of the autopilot course computer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Network with E7, Axiom and HS5 - Chuck - Raymarine - Moderator - 01-08-19 12:21 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication