Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Network with E7, Axiom and HS5

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Network with E7, Axiom and HS5
01-10-19, 01:54 AM
Post: #13
petersailor2 Offline
Junior Member
**
 		Posts: 9
Joined: Jan 2019
Reputation: 0
RE: [CA11] Network with E7, Axiom and HS5
Hi again,
As I have too long distance between the NMEA/Stng adapter A06045 for the Axiom to the STng backbone my question is if I can connect a Blue backbone cable on the STng converter no.2 (where the blue termination plug is fitted now) and run the cable close to the A06045 with a T-piece and then connect the spur from the A06045 to this? Then put the plug in the empty port of the T-piece.

Otherwise I have to find a suitable NMEA Devicenet cable to extend with, is there such cables ready made?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Network with E7, Axiom and HS5 - petersailor2 - 01-10-19 01:54 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication