Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Upgrading from E7 to Axiom 9 - cables/converters needed?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrading from E7 to Axiom 9 - cables/converters needed?
02-13-19, 03:29 PM (This post was last modified: 02-13-19 03:34 PM by Chuck - Raymarine - Moderator.)
Post: #5
scottotheforest Offline
Junior Member
**
 		Posts: 11
Joined: Feb 2018
Reputation: 0
RE: [CA11] Upgrading from E7 to Axiom 9 - cables/converters needed?
Beautiful Chuck,

I will contact my.supplier for the needed cable and AIS bridging device and see if there's an unoccupied spur socket.

Thank you for your sharp eye on the compass too. Since moving the E7 beside the compass it has not been usable. With the addition of the Axiom 9, I will be looking for a new.placement for the magnetic compass.

Kind regards Chuck,

Scott
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Upgrading from E7 to Axiom 9 - cables/converters needed? - scottotheforest - 02-13-19 03:29 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication