Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] replacing C80 with two E80's Seatalk connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] replacing C80 with two E80's Seatalk connection
02-13-19, 12:31 PM (This post was last modified: 02-13-19 12:45 PM by Chuck - Raymarine - Moderator.)
Post: #9
andyschoenb Offline
Junior Member
**
 		Posts: 14
Joined: Apr 2018
Reputation: 0
RE: [CA11] replacing C80 with two E80's Seatalk connection
Thank you Chuck - I do not believe this radar cable has a video interface. I believe it is an older system. Would I still follow the same splicing thread you referenced or would this be a simpler junction box / terminal strip connection? since your thread indicates that splicing is acceptable (and often done), do you have a diagram of the cable (number and size of the internal wires)?

Again thank you for your help
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] replacing C80 with two E80's Seatalk connection - andyschoenb - 02-13-19 12:31 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication