Raymarine forum / Raymarine Forums / Networking / System Integration v / [LW] [LW11] Axiom Humminbird connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Axiom Humminbird connection
03-08-19, 09:03 AM
Post: #4
Louise - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 867
Joined: Sep 2018
Reputation: 1
RE: [LW11] Axiom Humminbird connection
Dear Alan,

Thank you for the reply.

You can use the iTC-5 with the older analogue transducers, you will need to install a small backbone. The STng backbone will need its own dedicated 12v power supply, please find the reference manual for the STng networking here.

Having just looked at the specs of the Hummingbird - NMEA2000 is not supported, you will not be able to integrate this.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] Axiom Humminbird connection - Louise - Raymarine - Moderator - 03-08-19 09:03 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication