Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] New Axiom Install

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] New Axiom Install
03-11-19, 07:51 AM
Post: #5
TJ Champion Offline
Junior Member
**
 		Posts: 10
Joined: Mar 2019
Reputation: 0
RE: [CA11] New Axiom Install
Please excuse my lack of complete knowledge of all of the Raymarine systems and nomenclature. I will be making the seatalk1 to Seatalkng tie-in at the helm station ST700+ unit. If I am understanding what I am reading in your response, I need to cut and insulate the red wire that goes from the ST7000+ to the Type 400 course computer. is that correct?
I have attached an updated drawing to show the cabling and locations tie-ins of the new units
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] New Axiom Install - TJ Champion - 03-07-19, 12:31 PM
RE: [CA11] New Axiom Install - TJ Champion - 03-11-19 07:51 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication