Raymarine forum / Raymarine Forums / Networking / System Integration v / [DG] [DG11] ST50 anemometer in SeatalkNG network?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] ST50 anemometer in SeatalkNG network?
03-09-19, 06:11 AM (This post was last modified: 03-11-19 09:45 AM by Chuck - Raymarine - Moderator.)
Post: #3
capglider Offline
Junior Member
**
 		Posts: 12
Joined: Jan 2019
Reputation: 0
RE: [DG11] ST50 anemometer in SeatalkNG network?
Thanks for your reply. Good to hear that I will be able to keep the masthead transducer!

Having checked the backside of the i60 display online, I wonder how to connect the existing cables of the ST50 to this unit? Te cables now go directly into the back of the ST50 display, without any Seatalk connectors. Do i open up the cable from the transducer andsimply connect the individual wires to the connectors 3 through 7 asshown in par. 4.5 of the i60 manual ?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG11] ST50 anemometer in SeatalkNG network? - capglider - 03-09-19 06:11 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication