Raymarine forum / Raymarine Forums / Networking / System Integration v / [DG] [DG11] ST50 anemometer in SeatalkNG network?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] ST50 anemometer in SeatalkNG network?
03-11-19, 10:53 AM
Post: #4
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] ST50 anemometer in SeatalkNG network?
Hi capglider,

St50 used moulded on plugs to connect the transducer and the SeaTalk, i60 uses spade connectors for the transducer and a moulded plug for the SeaTalk.

The cable from the transducer which has a plug moulded on to the end of it, can be cut, the cable sheathing peeled back and the transducer cores connected colour for colour to the spade connections on the back of the i60.

Please see this link here for furthe rinformation.

Regards

Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG11] ST50 anemometer in SeatalkNG network? - Derek - Raymarine - Moderator - 03-11-19 10:53 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication