Raymarine forum / Raymarine Forums / Networking / System Integration v / [DG] [DG11] ST50 anemometer in SeatalkNG network?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] ST50 anemometer in SeatalkNG network?
06-10-19, 11:14 AM (This post was last modified: 06-10-19 12:31 PM by Chuck - Raymarine - Moderator.)
Post: #9
capglider Offline
Junior Member
**
 		Posts: 12
Joined: Jan 2019
Reputation: 0
RE: [DG11] ST50 anemometer in SeatalkNG network?
Hi Derek, thanks for your fast reply.
You probablymean the other way around? I have kept the old mast unit (with squarish cups), and replaced the ST50 instrument with an ST60+ Wind instrument. I have the feeling the instrument "underreads". Will setting the calibration to 0.7 not make things worse rather than better? If so, can I also calibrate with a factor of 1.3 in stead?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG11] ST50 anemometer in SeatalkNG network? - capglider - 06-10-19 11:14 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication