Raymarine forum / Raymarine Forums / Networking / System Integration v / [LW] [LW11] SeaTalk Converter vs Connector

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] SeaTalk Converter vs Connector
03-11-19, 06:24 AM
Post: #2
Louise - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 867
Joined: Sep 2018
Reputation: 1
RE: [LW11] SeaTalk Converter vs Connector
Dear Tizor,

Thank you for your query.

The ST5000+ autopilot and the E-Series classic can both be networked together over seatalk 1. Neither of these products have STng as they were manufactured before STng was introduced.

The seatalk 1 connection on the E-Classic can be found on the seatalk/ alarm out cable.

What other products do you have installed in the system? The E-Series Widescreen had STng connectivity on the back of the unit, the E-Series classic did not. Unless you have STng products or intend to start introducing STng products to your installation there is no requirement for an STng backbone when networking the ST5000+ and the E-Series classic on ST1.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] SeaTalk Converter vs Connector - Louise - Raymarine - Moderator - 03-11-19 06:24 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication