Raymarine forum / Raymarine Forums / Networking / System Integration v / [LW] [LW11] SeaTalk Converter vs Connector

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] SeaTalk Converter vs Connector
03-11-19, 10:00 AM
Post: #3
Tizor Offline
Junior Member
**
 		Posts: 9
Joined: May 2018
Reputation: 0
RE: [LW11] SeaTalk Converter vs Connector
Thank you for your reply. That makes sense. I assume that I can still buy a connector cable (SeaTalk1 flat blade to Seatalk1 5-pin) for that solution? The components I described are about the extent of my network for now. I will be purchasing a Standard Horizon GX2200 VHS soon, and will try and feed the AIS receiver data out of it to the E120, and that is NMEA 0183. I also plan on upgrading to an Evolution AP within the next year. Will upgrade the network to accommodate, but your direction will keep it simple for now.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] SeaTalk Converter vs Connector - Tizor - 03-11-19 10:00 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication