[CA] [CA11] AIS350 to AIS650

[Chuck - Raymarine - Moderator]

Michael,

As indicated previously, no configuration settings need be performed using the MFD. The AIS650's MMSI must be programmed into the AIS650 using the ProAIS2 software packaged within the AIS650's box. The AIS650 will need to be interfaced to the computer via a users supplied USB cable. Instructions for doing so may be found within the AIS650's Installation Guide. Alternatively, this service may be performed by an authorized Raymarine dealer / installer as is required by the FCC for US customers of the AIS650.