Raymarine forum / Raymarine Forums / Instruments v / [DG] [DG11] Tacktick Mast rotation sensor showing constant angle

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Tacktick Mast rotation sensor showing constant angle
03-22-19, 10:54 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] Tacktick Mast rotation sensor showing constant angle
Hi bjojor
Thank you for your enquiry,

This sounds like the Mast Rotation Transducer (MRT) has not been calibrated. Out of the box it will not work unless calibrated. The calibration process for the MRT is the same as for the compass transducer.
To make sure it is not the windvane or compass transducer. – Remove the MRT from the boat. Power cycle and then check the wind vane and compass data is live.

Regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG11] Tacktick Mast rotation sensor showing constant angle - Derek - Raymarine - Moderator - 03-22-19 10:54 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication