Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] NMEA 0183 from e7 MFD to VHF
03-26-19, 10:18 AM (This post was last modified: 03-26-19 10:20 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] NMEA 0183 from e7 MFD to VHF
Hi,
I need to get the NMEA 0183 from the e-series e7 display to my Sailor VHF.
Can I just connect the two wires (Yellow and Brown, NMEA OUT port 2) from the combined NMEA/Power leads to my VHF?
Find all posts by this user
Quote this message in a reply
03-26-19, 10:23 AM
Post: #2
RE: [CA11] NMEA 0183 from e7 MFD to VHF
Welcome to the Raymarine Forum Peter,

While you have correctly identified the leads, you have identified the incorrect NMEA 0183 Port. In a nutshell, the MFD's NMEA 0183 Port 1 OUT+ lead (yellow) will need be interfaced to the DSC VHF radio's NMEA 0183 IN+ lead/terminal. Additionally, the MFD's NMEA 0183 Port 1 OUT- lead (brown) will need be interfaced to the DSC VHF radio's NMEA 0183 IN- lead/terminal. Finally, the MFD's NMEA 0183 Port 1 setting will need to be configured to "NMEA 4800".
Find all posts by this user
Quote this message in a reply
03-27-19, 01:40 AM
Post: #3
RE: [CA11] NMEA 0183 from e7 MFD to VHF
Thanks for your help Chuck.
Find all posts by this user
Quote this message in a reply
03-27-19, 08:04 AM
Post: #4
RE: [CA11] NMEA 0183 from e7 MFD to VHF
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)