Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] X10 AUTO PILOT - Type 2 linear drive

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] X10 AUTO PILOT - Type 2 linear drive
04-02-19, 11:12 PM (This post was last modified: 04-03-19 10:33 AM by Chuck - Raymarine - Moderator.)
Post: #1
mattersfeld Offline
Junior Member
**
 		Posts: 3
Joined: Jul 2016
Reputation: 0
[CA11] X10 AUTO PILOT - Type 2 linear drive
I have a sailboat with an older autopilot using a Type 2 linear drive. Im wondering if I replaced the course computer with an X10 smartpilot would the Type 2 linear drive be compatible?
Find all posts by this user
Quote this message in a reply
04-03-19, 10:37 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] X10 AUTO PILOT - Type 2 linear drive
Welcome to the Raymarine Forum mattersfeld,

An X10 autopilot course computer is not designed to support the power requirements of a Type II Linear Drive. Within Raymarine's legacy autopilots, an S3/S3G or SPX30 autopilot would have been required. I seeking an Evolution autopilot, a T70161 EV400 Sail would be recommended.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication